Olympia Roof Pros provides professional wind damage roofing in Olympia, WA for residential and commercial properties across Thurston County and the south Sound. Wind takes a roof apart from the outside in, and it starts at the edge. On almost every wind-damaged roof we open in Thurston County the first thing that moved was drip edge or rake metal, and everything after that is a consequence.
Once perimeter metal lifts, the wind gets under the starter course, and from there it peels courses in sequence up the slope. The failure looks dramatic and it is usually the result of fasteners that were correct for the product but too far apart for an exposed corner, or a rake edge nailed at twelve inches on a gable that faces a clear approach from the southwest. Wind finds the weakest fastener before it finds the weakest material.
The low-slope side of this market solved that decades ago because code made it. Perimeter edge metal on a membrane roof carries an ANSI/SPRI ES-1 test rating, and it has to go on in the pattern that was tested, and the crews here work to that standard weekly on public buildings. We carry the same detail onto houses with shallow sheds and porch roofs, because the material is stocked locally and the crews already know it.
On steep slopes the equivalent is fastening density and starter discipline. Six nails inside the manufacturer's nail zone, a manufactured starter at the rake edge instead of a reversed shingle, and hip and ridge fastened to the exposure the manufacturer publishes rather than to whatever reaches. None of that is unusual, and most of it gets left out.
Repairs get scoped for the whole windward assembly, not for the missing pieces. Replacing eight tabs and leaving the rake metal that let them go is a repair that will be redone after the next front, and we would rather tell you that while we are standing on the roof than come back in February to explain it. The windward assembly is one system and it fails as one.
If the damage is confined and the roof is otherwise sound, we will say so and quote a few hundred dollars of work. Wind claims where the deductible exceeds the repair are common here, and we will do the arithmetic with you rather than pushing the job through an insurer for the sake of a bigger scope.
Our licensed and insured team brings the right materials and equipment to every job — quarter-inch-per-foot tapered polyisocyanurate cut to a drain-point layout, edge metal carrying an ANSI/SPRI ES-1 test rating with fastening to match, hot-air-welded thermoplastic seams probed by hand with a dull hook, two-inch core cuts patched and logged against a numbered roof plan, 24-gauge Kynar 500 standing seam on floating expansion clips, six-nail fastening set inside the manufacturer's published nail zone — and backs the work with a written workmanship warranty. We serve Olympia and nearby communities including Lacey, Tumwater, Yelm, Tenino.
What We Handle
Everything our wind damage roofing in Olympia covers
One crew, one point of contact, and the full range of wind damage roofing work in Olympia, WA. If it is on this list we do it in house rather than handing it to a subcontractor:
- wind damage roof repair olympia
- wind damage roofing olympia wa
- blown off shingles olympia
- roof uplift damage thurston county
- wind driven rain roof leak olympia
- edge metal repair olympia wa
- ridge cap blown off lacey
- wind damage inspection olympia
- roof wind repair tumwater
- storm wind roof damage thurston county
- perimeter flashing repair olympia
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Olympia services.
Materials, equipment and how we do wind damage roofing
The difference between wind damage roofing that lasts and wind damage roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with quarter-inch-per-foot tapered polyisocyanurate cut to a drain-point layout, edge metal carrying an ANSI/SPRI ES-1 test rating with fastening to match, hot-air-welded thermoplastic seams probed by hand with a dull hook, two-inch core cuts patched and logged against a numbered roof plan, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Olympia job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Thurston County and the south Sound means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do wind damage roofing outside Olympia
Olympia Roof Pros covers Olympia and the surrounding communities of Thurston County and the south Sound. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Wind Damage Roofing in Lacey, WA — Thurston County, population 53,526
- Wind Damage Roofing in Tumwater, WA — Thurston County, population 25,350
- Wind Damage Roofing in Yelm, WA — Thurston County, population 10,617
- Wind Damage Roofing in Tenino, WA — Thurston County, population 1,870
- Wind Damage Roofing in Rainier, WA — Thurston County, population 2,369
- Wind Damage Roofing in Bucoda, WA — Thurston County, population 600
Start on the Olympia Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Olympia Chooses Olympia Roof Pros
- ✓We quote your summer date and your November date side by side, because in a capital city the dry weeks are sold against a public bid calendar and the gap between those two prices is real money you should get to decide about.
- ✓Every scope carries unit prices for sheathing, blocking, fascia and flashing before the tear-off starts, the way a public change order has to be written, so nothing on your job gets renegotiated from the top of a ladder.
- ✓We will tell you that nobody owes you prevailing wage on a private house. If a bid quotes the published Thurston County rate at you as a justification, that is a public works number being used as a sales line.
- ✓We do not install new concrete or clay tile in this market. The bench that can flash and maintain it properly is thin here, and we would sooner turn the work down than leave you with a roof nobody local will service.
The standards behind wind damage roofing
Quality here is not a matter of opinion — it is written down. The wind damage roofing work we do in Olympia follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every wind damage roofing project in Olympia gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free wind damage roofing free estimate in Olympia, or request a quote and we'll get right back to you.